Reference number
ISO/TS 17951-2:2016
Technical Specification
ISO/TS 17951-2:2016
Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation
Edition 1
2016-07
Technical Specification
Preview
ISO/TS 17951-2:2016
71105
Indisponible en français
Publiée (Edition 1, 2016)
Cette publication a été révisée et confirmée pour la dernière fois en 2023. Cette édition reste donc d’actualité.

ISO/TS 17951-2:2016

ISO/TS 17951-2:2016
71105
Langue
Format
CHF 96
Convertir les francs suisses (CHF) dans une autre devise

Résumé

ISO/TS 17951-2:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by continuous flow analysis (CFA). Any insoluble or complexed fluoride is converted to fluoride ion by an automated continuous flow distillation procedure from sulfuric/phosphoric acid. Fluoride ion in the distillate is measured using flow analysis with lanthanum alizarin complexone and spectrometric detection. This method is applicable to industrial waste waters, effluents, surface waters, ground waters, leachates. When this method is applied to the analysis of drinking water, a heater and a distillation unit is unnecessary. Some drinking water contains high concentration of aluminium and iron. In the case of drinking water, ISO/TS 17951-2:2016 is appropriate to drinking water with low interferences. It is not applicable to samples which contain large amount of suspended matter.

In ISO/TS 17951-2:2016, two working ranges are described:

- working range I: 0,1 mg/l to 1,0 mg/l;

- working range II: 1,0 mg/l to 10 mg/l.

The specification of the calibration solutions are to be adapted accordingly.

Informations générales

  •  : Publiée
     : 2016-07
    : Norme internationale confirmée [90.93]
  •  : 1
  • ISO/TC 147/SC 2
    13.060.50 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance