Reference number
ISO/IEC 14846:2003
International Standard
ISO/IEC 14846:2003
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Intrusion supplementary service
Edition 2
2003-04
Read sample
ISO/IEC 14846:2003
36848
Published (Edition 2, 2003)
This publication was last reviewed and confirmed in 2008. Therefore this version remains current.

ISO/IEC 14846:2003

ISO/IEC 14846:2003
36848
Language
Format
CHF 194
Convert Swiss francs (CHF) to your currency
The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site

Abstract

ISO/IEC 14846:2003 specifies the signalling protocol for the support of the Call Intrusion supplementary service (SS-CI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).

SS-CI is a supplementary service which, on request from the calling user, enables the calling user to establish communication with a busy called user by breaking into an established call between the called user and a third user (unwanted user).

The Q reference point is defined in ISO/IEC 11579-1.

Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 14845.

The signalling protocol for SS-CI operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.

ISO/IEC 14846:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CI and other supplementary services and ANFs.

NOTE Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.

ISO/IEC 14846:2003 is applicable to PINXs which can interconnect to form a PISN.

General information

  •  : Published
     : 2003-04
    : Close of review [90.60]
  •  : 2
     : 64
  • ISO/IEC JTC 1/SC 6
    33.040.35 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support