International Standard
ISO 4386-3:2018
Plain bearings — Metallic multilayer plain bearings — Part 3: Non-destructive penetrant testing
Reference number
ISO 4386-3:2018
Версия 2
International Standard
ISO 4386-3:2018
недоступно на русском языке
Опубликовано (Версия 2, 2018)

ISO 4386-3:2018

ISO 4386-3:2018
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта


This document specifies a non‑destructive penetrant testing for determining bond defects and discontinuities in the sliding surface of the bearing.

The penetration method is used to detect

a) bond defects in the transitional area between the bearing backing/bearing material on the end faces and joint faces of multilayer plain bearings which cannot be detected by the ultrasonic testing method specified in ISO 4386‑1, and

b) discontinuities in the sliding surface of the bearing.

The penetration method is applicable, in principle, to finished multilayer plain bearings.

The bond test is usually carried out on cast multilayer plain bearings, with a backing consisting of steel, cast steel or cast bronze. It can also be used as a non-production method to aid detection of manufacturing process defects with other bearing material types. Bearing backings which cannot be tin-plated, or only with difficulty, such as perlitic cast iron, rust-resistant steel and cast aluminium, cannot be tested since no bond is possible between the bearing material and bearing backing.

Общая информация

  •  : Опубликовано
     : 2018-07
    : Рассылка краткого отчета о пересмотре [90.60]
  •  : 2
  • ISO/TC 123/SC 2
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)