Тезис
ISO 13766-2:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as classified in ISO/TR 12603:2010:
- drilling and foundation equipment;
- equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement;
- road construction and maintenance machinery and equipment.
ISO 13766-2:2018 deals with EMC requirements related to the functional safety of the machinery, its electrical/electronic subassemblies (ESA) and of separate ESA.
ISO 13766-2:2018 is relevant only to the safety-related parts of control systems (SRP/CS) as defined in ISO 13849‑1:2015 using electrical/electronic components which meet design requirements equal to or greater than safety‑related performance level PL b as defined in ISO 13849‑1:2015. It also deals with electrical and electronic components or separate ESA intended to be fitted on machinery under the restriction of PL b. The following electromagnetic disturbance phenomena are evaluated:
- radiated electromagnetic fields from off-board sources with various field strengths and frequencies;
- radiated electromagnetic fields from on-board sources (antenna inside/outside) with various field strengths and frequencies;
- electrostatic discharge;
- conducted and coupled electrical transients.
The machinery can have DC or AC or a combination of both as the internal electrical power supply system.
ISO 13766-2:2018 is not applicable to machines that are designed to be supplied by an external mains network or to phenomena caused by military applications.
NOTE Grid-connected machines are covered by IEC 61000.
Общая информация
-
Текущий статус: ОпубликованоДата публикации: 2018-04Этап: Подтверждение действия международного стандарта [90.93]
-
Версия: 1
-
Технический комитет :ISO/TC 127/SC 2
- RSS обновления
Жизненный цикл
-
Ранее
ОтозваноISO 13766:2006
-
Сейчас
ОпубликованоISO 13766-2:2018
Стандарт, который пересматривается каждые 5 лет
Этап: 90.93 (Подтверждено)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00