Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 213 Секретариата Этап ICS
Standard reference temperature for industrial length measurements
95.99
Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification
95.99
Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
95.99
Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
60.60
ISO system of limits and fits — Part 1: Bases of tolerances, deviations and fits
95.99
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
90.93
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits — Technical Corrigendum 1
60.60
ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
95.99
ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
90.93
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1
60.60
ISO system of limits and fits — Part I : General, tolerances and deviations
95.99
Toleranced dimensions — Conversion from inches into millimetres and vice versa
95.99
Technical drawings — Tolerancing of linear and angular dimensions
95.99
Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
90.92
Dial gauges reading in 0.01 mm, 0.001 in and 0.0001 in
95.99
Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges — Technical Corrigendum 1
60.60
Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges — Technical Corrigendum 2
60.60
Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
30.99
Surface roughness — Parameters, their values and general rules for specifying requirements
95.99
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on drawings
95.99
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
90.93
Series of conical tapers and taper angles
95.99
Geometrical Product Specifications (GPS) — Series of conical tapers and taper angles
95.99
Geometrical product specifications (GPS) — Series of conical tapers and taper angles
90.93
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
95.99
Technical drawings — Dimensioning and tolerancing of profiles
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
90.93
Selection of tolerance zones for general purposes
95.99
Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
95.99
Instruments for the measurement of surface roughness by the profile method — Vocabulary
95.99
Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
90.92
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
30.60
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
90.93
ISO system of limits and fits — Part II : Inspection of plain workpieces
95.99
System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm
95.99
Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes
90.20
Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
90.20
Limits and fits — Series of angles and slopes on wedges and prisms
95.99
Geometrical Product Specifications (GPS) — Series of angles and slopes on prisms
95.99
Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed
95.99
Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed
95.99
Roughness comparison specimens — Part 2: Spark-eroded, shot blasted and grit blasted, and polished
95.99
Roughness comparison specimens — Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished
95.99
Roughness comparison specimens — Part 3: Cast surfaces
95.99
Technical drawings — Geometrical tolerancing — Maximum material principle
95.99
Technical drawings — Geometrical tolerancing — Maximum material principle — Amendment 1: Least material requirement
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
60.60
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
90.92
General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
95.99
Permissible machining variations in dimensions without tolerance indication
95.99
General tolerances
30.00
Technical drawings — Dimensioning and tolerancing — Cones
95.99
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
95.99
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
90.93
Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of consecutive profile transformation — Contact profile meters, system M
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
90.92
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments — Technical Corrigendum 1
60.60
Vernier callipers reading to 0,1 and 0,05 mm
95.99
Micrometer callipers for external measurement
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
60.60
Gauge blocks
95.99
Geometrical Product Specifications (GPS) — Length standards — Gauge blocks
90.93
Geometrical Product Specifications (GPS) — Length standards — Gauge blocks — Technical Corrigendum 1
60.60
Blanks for plug gauges and handles (taper lock and trilock) and ring gauges — Design and general dimensions
95.99
Surface roughness — Terminology — Part 1: Surface and its parameters
95.99
Surface roughness — Terminology — Part 2: Measurement of surface roughness parameters
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Amendment 1: Peak count number
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 1
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 2
95.99
Rules and procedures for the measurement of surface roughness using stylus instruments
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture — Technical Corrigendum 1
95.99
Methods for the assessement of departure from roundness — Measurement of variations in radius
90.93
Methods for the assessment of departure from roundness — Measurement by two- and three-point methods
95.99
Geometrical product specifications (GPS) — Association
60.60
Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
40.60
System of cone fits for cones from C = 1 : 3 to 1 : 500, lengths from 6 to 630 mm and diameters up to 500 mm
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
90.93
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards — Technical Corrigendum 1
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards — Technical Corrigendum 2
95.99
Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
90.93
Calibration specimens — Stylus instruments — Types, calibration and use of specimens
95.99
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Positional tolerancing
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
90.93
Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
95.99
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
60.60
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Verification principles and methods — Guidelines
95.99
Geometrical product specifications (GPS) — Rotary axis form-measuring instruments — Design and metrological characteristics
60.60
Measurement of roundness — Terms, definitions and parameters of roundness
95.99
Vernier callipers reading to 0,02 mm
95.99
Height setting micrometers and riser blocks
95.99
Technical drawings — Fundamental tolerancing principle
95.99
Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
90.93
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
90.93
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
90.93
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
95.99
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
60.60
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
95.99
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system
60.60
Castings — System of dimensional tolerances
95.99
Castings — System of dimensional tolerances and machining allowances
95.99
Surface plates — Part 1: Cast iron
90.93
Surface plates — Part 2: Granite
90.93
Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
90.93
Geometrical product specifications (GPS) — Dimensional measuring equipment: Dial test indicators (lever type) — Design and metrological characteristics
90.93
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
90.93
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary
90.93
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary — Technical Corrigendum 1
60.60
Coordinate metrology — Part 2: Performance assessment of coordinate measuring machines
95.99
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring size
95.99
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring linear dimensions
90.93
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis
90.93
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode
95.99
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode — Technical Corrigendum 1
95.99
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using multiple-stylus probing systems
95.99
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
95.99
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode
60.60
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
90.93
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features — Technical Corrigendum 1
60.60
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 7: CMMs equipped with imaging probing systems
90.93
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors
90.93
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
90.93
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers for measuring point-to-point distances
95.99
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
60.60
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 12: Articulated arm coordinate measurement machines (CMM)
90.93
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 13: Optical 3D CMS
60.60
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 102: The language of symbols G3
30.60
Technical drawings — Tolerancing of orientation and location — Projected tolerance zone
95.99
Technical drawings — Dimensioning and tolerancing — Non-rigid parts
95.99
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
90.93
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts — Technical Corrigendum 1
60.60
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters — Technical Corrigendum 1
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters
90.93
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters — Technical Corrigendum 1
90.93
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Profile — Calibration of contact (stylus) instruments
30.60
Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
90.93
Geometrical Product Specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
95.99
Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators
90.93
Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators
95.99
Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
90.93
Geometrical Product Specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
95.99
Geometrical product specifications (GPS) — Roundness — Part 2: Specification operators
90.93
Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators
95.99
Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness
90.93
Geometrical Product Specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness
95.99
Geometrical product specifications (GPS) — Straightness — Part 2: Specification operators
90.93
Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators
95.99
Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness
90.93
Geometrical Product Specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness
95.99
Geometrical product specifications (GPS) — Flatness — Part 2: Specification operators
90.93
Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators
95.99
Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators — Technical Corrigendum 1
95.99
Geometrical product specification (GPS) — Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics
90.92
Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
90.93
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
90.20
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics
95.99
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
60.60
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions
90.60
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions — Technical Corrigendum 1
60.60
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve — Technical Corrigendum 1
95.99
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
95.99
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications
95.99
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
95.99
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
90.93
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
90.93
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
95.99
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification — Technical Corrigendum 1
60.60
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
90.93
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
95.99
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules
90.93
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 5: Uncertainty in verification testing of indicating measuring instruments
90.93
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
60.60
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
95.99
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
90.92
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
40.60
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
95.99
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
90.93
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
90.93
Geometrical product specifications (GPS) — Extraction
90.93
Geometrical product specifications (GPS) — Matrix model
90.93
Geometrical product specification (GPS) — Masterplan
95.99
Geometrical Product Specifications (GPS) — Geometrical features — Part 1: General terms and definitions
95.99
Geometrical Product Specifications (GPS) — Geometrical features — Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
95.99
Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment
95.99
Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment
90.93
Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics
90.93
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 2: Part 2: Evaluating task-specific measurement uncertainty by multiple measurement strategies using a single uncalibrated workpiece
30.60
Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
90.93
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards
95.99
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
90.93
Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
90.93
Geometrical Product Specifications (GPS) — Linear and angular dimensioning and tolerancing: +/- limit specifications — Step dimensions, distances, angular sizes and radii
95.99
Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
90.93
Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
95.99
Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts
90.93
Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts
95.99
Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
90.92
Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
50.00
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
90.92
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
95.99
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
40.00
Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects
90.93
Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects
95.99
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets
95.99
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets
95.99
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: wavelets
60.60
Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts
90.93
Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts
95.99
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
90.92
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
95.99
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
50.00
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
60.60
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
95.99
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
90.93
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
95.99
Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
90.93
Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
95.99
Geometrical product specifications (GPS) — Filtration — Part 45: Morphological profile filters: Segmentation
60.00
Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques
90.93
Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques
95.99
Geometrical product specification (GPS) — Filtration — Part 60: Linear areal filters — Basic concepts
90.93
Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters
90.93
Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters — Amendment 1
60.60
Geometrical product specifications (GPS) — Filtration — Part 62: Linear areal filters: spline filters
60.60
Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
90.93
Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
90.93
Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
90.93
Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
95.99
Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
90.93
Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties
95.99
Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties — Technical Corrigendum 1
95.99
Geometrical product specifications (GPS) — General concepts — Part 3: Toleranced features
90.93
Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations
90.93
Geometrical product specification (GPS) — Tolerancing of moveable assemblies
90.93
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
90.93
Geometrical product specifications (GPS) — Partition — Part 1: Vocabulary and basic concepts
60.60
Geometrical product specifications (GPS) — Partition — Part 2: Nominal model
60.60
Geometrical product specifications (GPS) — Partition — Part 3: Methods used for specification and verification
60.60
Geometrical product specifications (GPS) — Population specification
90.93
Geometrical product specifications (GPS) — Decomposition of geometrical characteristics for manufacturing control
90.93
Geometrical product specifications (GPS) — Transition specification
60.60
Geometrical product specifications (GPS) — Types of documents with GPS
90.93
Geometrical product specifications (GPS) — Surface texture: Profile — Part 1: Indication of surface texture
60.60
Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters
60.60
Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators
60.60
Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
60.60
Geometrical product specifications (GPS) — Features utilized in specification and verification
90.93
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
90.93
Geometrical product specifications (GPS) — Surface texture: Profile method — Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
60.60
Technical product specification (TPS) — Application guidance — International model for national implementation
95.99
Technical product specification (TPS) — Application guidance — International model for national implementation
60.60
Geometrical product specifications (GPS) — Association — Mathematical concepts
30.99
Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture
90.93
Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
95.99
Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
60.60
Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
90.93
Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface topography
20.00
Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
90.92
Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
20.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
95.99
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
30.60
Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p
90.93
Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p — Amendment 1
60.60
Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
90.93
Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
90.93
Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
50.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments
50.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
50.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
50.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Design and characteristics of non-contact (point autofocus probe) instruments
50.00
Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
90.92
Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Design and characteristics of non-contact (focus variation) instruments
30.60
Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
90.92
Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Design and characteristics of non-contact (confocal microscopy) instruments
20.00
Geometrical product specifications (GPS) — Surface texture: Areal — Part 700: Calibration, adjustment and verification of areal topography measuring instruments
60.60
Geometrical product specifications (GPS) — Surface texture: Areal — Part 701: Calibration and measurement standards for contact (stylus) instruments
90.93
Geometrical product specifications (GPS) — Characteristics and conditions — Definitions
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.