Filter :
Standard and/or project | Stage | TC |
---|---|---|
Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
|
90.93 | ISO/TC 108 |
Vibration and shock — Isolators — Procedure for specifying characteristics
|
95.99 | ISO/TC 108 |
Vibration and shock — Vocabulary
|
95.99 | ISO/TC 108 |
Vibration and shock — Vocabulary
|
95.99 | ISO/TC 108 |
Mechanical vibration, shock and condition monitoring — Vocabulary
|
95.99 | ISO/TC 108 |
Mechanical vibration, shock and condition monitoring — Vocabulary
|
90.93 | ISO/TC 108 |
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
|
95.99 | ISO/TC 108 |
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
|
90.93 | ISO/TC 108 |
Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations
|
95.99 | ISO/TC 70 |
Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations
|
90.93 | ISO/TC 70 |
Ships and marine technology — Technical guidelines for active source exploration with ocean bottom seismometers (OBS)
|
60.60 | ISO/TC 8/SC 13 |
Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s — Measurement and evaluation of vibration severity in situ
|
95.99 | ISO/TC 108 |
Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ
|
95.99 | ISO/TC 108/SC 2 |
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test
|
95.99 | ISO/TC 70/SC 7 |
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test
|
90.93 | ISO/TC 70/SC 7 |
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings
|
50.98 | ISO/TC 70/SC 7 |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 2
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures
|
90.93 | ISO/TC 108/SC 2 |
Code for the measurement and reporting of shipboard vibration data
|
95.99 | ISO/TC 108/SC 2 |
Code for the measurement and reporting of local vibration data of ship structures and equipment
|
95.99 | ISO/TC 108/SC 2 |
Civil small and light unmanned aircraft systems (UAS) — Vibration test methods
|
60.60 | ISO/TC 20/SC 16 |
Electrodynamic test equipment for generating vibration — Methods of describing equipment characteristics
|
95.99 | ISO/TC 108/SC 6 |
Electrodynamic vibration generating systems — Performance characteristics
|
90.93 | ISO/TC 108/SC 6 |
Electrodynamic vibration generating systems — Performance characteristics — Amendment 1
|
60.60 | ISO/TC 108/SC 6 |
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 1
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 2
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 1: Primary vibration calibration by laser interferometry
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 2: Primary shock calibration by light cutting
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 3: Secondary vibration calibration
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 4: Secondary shock calibration
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 5: Calibration by Earth's gravitation
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 6: Primary vibration calibration at low frequencies
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 9: Secondary vibration calibration by comparison of phase angles
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 10: Primary calibration by high impact shocks
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 11: Testing of transverse vibration sensitivity
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 12: Testing of transverse shock sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 13: Testing of base strain sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 14: Resonance frequency testing of undamped accelerometers on a steel block
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 17: Testing of fixed temperature sensitivity
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 19: Testing of magnetic field sensitivity
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 20: Primary vibration calibration by the reciprocity method
|
95.99 | ISO/TC 108 |
Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Mechanical mounting of accelerometers
|
95.99 | ISO/TC 108 |
Mechanical vibration and shock — Mechanical mounting of accelerometers
|
95.99 | ISO/TC 108 |
Mechanical vibration and shock — Mechanical mounting of accelerometers
|
60.60 | ISO/TC 108 |
Auxiliary tables for vibration generators — Methods of describing equipment characteristics
|
95.99 | ISO/TC 108/SC 6 |
Auxiliary tables for vibration generators — Methods of describing equipment characteristics — Technical Corrigendum 1
|
95.99 | ISO/TC 108/SC 6 |
Auxiliary tables for vibration generators — Methods of describing equipment characteristics
|
90.20 | ISO/TC 108/SC 6 |
Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
|
95.99 | ISO/TC 108/SC 2 |
Vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic definitions and transducers
|
95.99 | ISO/TC 108 |
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications
|
90.93 | ISO/TC 108 |
Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
|
95.99 | ISO/TC 108 |
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
|
90.93 | ISO/TC 108 |
Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
|
95.99 | ISO/TC 108 |
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
|
90.20 | ISO/TC 108 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation — Part 1: General guidelines
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 1: General guidelines
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 2: Large land-based steam turbine generator sets
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines — Technical Corrigendum 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 4: Gas turbine sets
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibrations — Land vehicles — Method for reporting measured data
|
90.93 | ISO/TC 108/SC 2 |
Shock and vibration measurements — Characteristics to be specified for seismic pick-ups
|
90.93 | ISO/TC 108 |
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
|
95.99 | ISO/TC 70 |
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
|
90.93 | ISO/TC 70 |
Mechanical shock — Testing machines — Characteristics and performance
|
95.99 | ISO/TC 108 |
Mechanical shock — Testing machines — Characteristics and performance
|
90.93 | ISO/TC 108/SC 6 |
Mechanical vibration — Shock-and-vibration-sensitive electronic equipment — Methods of measurement and reporting data of shock and vibration effects in buildings
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
|
95.99 | ISO/TC 108/SC 2 |
Acceptance code for gears — Part 2: Determination of mechanical vibrations of gear units during acceptance testing
|
95.99 | ISO/TC 60 |
Mechanical vibration — Road surface profiles — Reporting of measured data
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Road surface profiles — Reporting of measured data
|
90.93 | ISO/TC 108/SC 2 |
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics
|
90.93 | ISO/TC 108/SC 6 |
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1
|
60.60 | ISO/TC 108/SC 6 |
Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses
|
90.93 | ISO/TC 108 |
Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components
|
90.93 | ISO/TC 108/SC 2 |
Damping materials — Graphical presentation of the complex modulus
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
|
90.93 | ISO/TC 108/SC 2 |
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing
|
95.99 | ISO/TC 108/SC 6 |
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing — Technical Corrigendum 1
|
95.99 | ISO/TC 108/SC 6 |
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing
|
60.60 | ISO/TC 108/SC 6 |
Vibration-generating machines — Guidance for selection — Part 2: Equipment for dynamic structural testing
|
90.60 | ISO/TC 108/SC 6 |
Vibration generating machines — Guidance for selection — Part 4: Equipment for multi-axial environmental testing
|
60.60 | ISO/TC 108/SC 6 |
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in excess of 50 MW
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min — Technical Corrigendum 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivatives
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1
|
60.60 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox
|
90.92 | ISO/TC 108/SC 2 |
Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration
|
90.93 | ISO/TC 108 |
Condition monitoring and diagnostics of machines — Vocabulary
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Vocabulary
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
|
90.93 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
|
95.99 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
|
90.93 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
|
90.93 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings
|
60.60 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers
|
60.60 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
|
90.92 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
|
90.92 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 10: Diagnostic techniques for electrical generators with fluid-film bearings
|
60.60 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines
|
90.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 2: Data processing
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 3: Communication
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
|
40.20 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications
|
30.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — General guidelines on data interpretation and diagnostics techniques
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — General guidelines on using performance parameters
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
|
40.20 | ISO/TC 108/SC 5 |
Industrial fans — Method of measurement of fan vibration
|
90.60 | ISO/TC 117 |
Industrial fans — Method of measurement of fan vibration — Technical Corrigendum 1
|
60.60 | ISO/TC 117 |
Condition monitoring and diagnostics of machine systems — Tribology-based monitoring and diagnostics — Part 1: General requirements and guidelines
|
90.20 | ISO/TC 108/SC 5 |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1: General guidance
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 34: Characterizing irregularity of the running surfaces with respect to vibration excitation
|
60.60 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary — Amendment 1
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings
|
60.60 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Vibration of stationary structures — Specific requirements for quality management in measurement and evaluation of vibration
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration and shock — Coupling forces at the man—machine interface for hand-transmitted vibration
|
95.99 | ISO/TC 108/SC 4 |
Vibration and shock generating systems — Vocabulary
|
90.93 | ISO/TC 108/SC 6 |
Vibration and shock generating systems — Vocabulary — Amendment 1
|
60.60 | ISO/TC 108/SC 6 |
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 1
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 2
|
40.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 11: Primary vibration calibration by laser interferometry
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 15: Primary angular vibration calibration by laser interferometry
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation
|
90.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer
|
90.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Technical Corrigendum 1
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer
|
90.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer — Amendment 1
|
60.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1
|
40.60 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 34: Testing of sensitivity at fixed temperatures
|
90.20 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators
|
90.93 | ISO/TC 108 |
Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Performance parameters for condition monitoring of structures
|
90.60 | ISO/TC 108 |
Condition monitoring and diagnostics of machines — General guidelines
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — General guidelines
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — General guidelines
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Approaches for performance diagnosis
|
90.93 | ISO/TC 108/SC 5 |
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 1: Direct method
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 1: General introduction
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 1: General introduction — Technical Corrigendum 1
|
60.60 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis — Technical Corrigendum 1
|
60.60 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
|
90.93 | ISO/TC 108 |
Condition monitoring and diagnostics of machines — Thermography — Part 1: General procedures
|
90.93 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics
|
90.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process — Technical Corrigendum 1
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assessment process
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machine systems — Requirements for certification of personnel — Part 1: Sector specific requirements for certification bodies and the certification process
|
60.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics
|
40.00 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process — Amendment 1
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 3: Requirements for training bodies and the training process
|
50.20 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis
|
90.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
|
30.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for certification of personnel — Part 6: Acoustic emission
|
60.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography
|
90.60 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 8: Ultrasound
|
90.92 | ISO/TC 108/SC 5 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method — Amendment 1
|
60.60 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method
|
90.60 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method — Amendment 1
|
60.60 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
|
90.93 | ISO/TC 108 |
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition
|
90.93 | ISO/TC 108 |
Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
|
90.93 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machines — Hydroelectric generating units
|
60.60 | ISO/TC 108/SC 5 |
Human response to vibration — Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
|
60.60 | ISO/TC 108 |
Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
|
90.92 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min — Amendment 1
|
60.60 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min
|
90.92 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems
|
90.93 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 9: Gear units
|
60.60 | ISO/TC 108/SC 2 |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
|
40.60 | ISO/TC 108/SC 2 |
Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors
|
90.93 | ISO/TC 108/SC 5 |
Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
|
90.93 | ISO/TC 108 |
Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
|
90.93 | ISO/TC 8/SC 8 |
Condition monitoring and diagnostics of machines — Acoustic emission
|
90.93 | ISO/TC 108/SC 5 |
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
|
95.99 | ISO/TC 108/SC 2 |
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Evaluation of steam and gas turbine generator sets due to electrical excitation
|
60.60 | ISO/TC 108/SC 2 |
Space systems — Vibration testing
|
60.60 | ISO/TC 20/SC 14 |
Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation
|
95.99 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
|
90.92 | ISO/TC 108/SC 5 |
Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
|
30.99 | ISO/TC 108/SC 5 |
Smart community infrastructures — Disaster risk reduction — Guidance for implementing seismometer systems
|
60.60 | ISO/TC 268/SC 1 |
No matching records found. Please try changing the filter settings.