Reference number
ISO 5628:2019
International Standard
ISO 5628:2019
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
Edition 3
2019-05
Preview
ISO 5628:2019
76347
Indisponible en français
Publiée (Edition 3, 2019)

ISO 5628:2019

ISO 5628:2019
76347
Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.

For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.

For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.

The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded.

In these bending tests, the test pieces of paper and board are regarded as "beams" as defined by the science of the strength of materials, see Reference [2].

Informations générales

  •  : Publiée
     : 2019-05
    : Clôture de l'examen [90.60]
  •  : 3
  • ISO/TC 6/SC 2
    85.060 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance