Filter :
Standard and/or project under the direct responsibility of ISO/TC 256 Secretariat Stage ICS
Lithopone pigments for paints — Specifications and methods of test
95.99
Lithopone pigments — General requirements and methods of testing
90.93
Red lead for paints
95.20
White lead pigments for paints
95.99
Titanium dioxide pigments for paints — Part 1: Specifications and methods of test
90.93
Titanium dioxide pigments for paints
95.99
General methods of test for pigments and extenders — Part 1: Comparison of colour of pigments
90.92
General methods of test for pigments and extenders — Part 1: Comparison of colour of pigments
20.00
General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 degrees C
95.99
General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 °C
60.60
General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method
95.99
General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method
90.93
General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract
90.93
General methods of test for pigments and extenders — Part 5: Determination of oil absorption value
90.92
General methods of test for pigments and extenders — Part 5: Determination of oil absorption value
20.00
General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
95.99
General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
90.93
General methods of test for pigments and extenders — Part 8: Determination of matter soluble in water — Cold extraction method
95.99
General methods of test for pigments and extenders — Part 8: Determination of matter soluble in water — Cold extraction method
90.93
General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension
95.99
General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension
90.92
General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension
20.00
General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
95.99
General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
90.93
General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping
90.93
Withdrawal of ISO/R 787/12-1970
95.99
General methods of test for pigments — Part 13: Determination of water-soluble sulphates, chlorides and nitrates
95.99
General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulfates, chlorides and nitrates
95.99
General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulphates, chlorides and nitrates
90.20
General methods of test for pigments — Part 14: Determination of resistivity of aqueous extract
95.99
General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
95.99
General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
90.93
General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of similar types
95.99
General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of similar types
90.20
General methods of test for pigments and extenders — Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method
90.93
General methods of test for pigments — Part 17: Comparison of lightening power of white pigments
95.99
General methods of test for pigments and extenders — Part 17: Comparison of lightening power of white pigments
95.99
General methods of test for pigments and extenders — Part 17: Comparison of lightening power of white pigments
90.93
General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing procedure
90.92
General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing procedure
20.00
General methods of test for pigments — Part 19: Determination of water-soluble nitrates (Salicylic acid method)
95.99
General methods of test for pigments — Part 19: Determination of water-soluble nitrates (Salicylic acid method)
60.60
General methods of test for pigments — Part 20: Comparison of ease of dispersion (Oscillatory shaking method)
95.99
General methods of test for pigments and extenders — Part 21: Comparison of heat stability of pigments using a stoving medium
90.93
General methods of test for pigments and extenders — Part 22: Comparison of resistance to bleeding of pigments
90.93
General methods of test for pigments and extenders — Part 23: Determination of density (using a centrifuge to remove entrained air)
90.93
General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric method
95.99
General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
90.92
General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
20.00
General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
95.99
General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
90.93
General methods of tests for pigments and extenders — Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
90.93
Ultramarine pigments for paints
95.99
Ultramarine pigments
60.60
Aluminium pigments for paints — Part 1: General aluminium pigments
60.60
Aluminium pigments for paints — Part 2: Vacuum metallized aluminium pigments
60.60
Aluminium pigments for paints
95.99
Aluminium pigments for paints — Amendment 1
95.99
Iron oxide pigments for paints
95.99
Iron oxide pigments — Specifications and methods of test
90.93
Iron oxide pigments — Specifications and methods of test — Technical Corrigendum 1
60.60
Iron oxide pigments — Specifications and methods of test — Technical Corrigendum 2
60.60
Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
90.93
Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments — Technical Corrigendum 1
60.60
Strontium chromate pigments for paints
90.93
Barium chromate pigments for paints
90.93
Iron blue pigments for paints
95.99
Iron blue pigments — Specifications and methods of test
90.93
Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods
95.99
Extenders — Specifications and methods of test — Part 1: Introduction and general test methods
60.60
Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate)
95.99
Extenders — Specifications and methods of test — Part 2: Baryte (natural barium sulfate)
60.60
Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe
95.99
Extenders — Specifications and methods of test — Part 3: Blanc fixe
60.60
Extenders for paints — Specifications and methods of test — Part 4: Whiting
95.99
Extenders — Specifications and methods of test — Part 4: Whiting
60.60
Extenders for paints — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate
95.99
Extenders — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate
60.60
Extenders for paints — Specifications and methods of test — Part 6: Precipitated calcium carbonate
95.99
Extenders — Specifications and methods of test — Part 6: Precipitated calcium carbonate
60.60
Extenders for paints — Specifications and methods of test — Part 7: Dolomite
95.99
Extenders — Specifications and methods of test — Part 7: Dolomite
60.60
Extenders for paints — Specifications and methods of test — Part 8: Natural clay
95.99
Extenders — Specifications and methods of test — Part 8: Natural clay
60.60
Extenders for paints — Specifications and methods of test — Part 9: Calcined clay
95.99
Extenders — Specifications and methods of test — Part 9: Calcined clay
60.60
Extenders for paints — Specifications and methods of test — Part 10: Natural talc/chlorite in lamellar form
95.99
Extenders — Specifications and methods of test — Part 10: Natural talc/chlorite in lamellar form
60.60
Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates
95.99
Extenders — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates
60.60
Extenders for paints — Specifications and methods of test — Part 12: Muscovite-type mica
95.99
Extenders — Specifications and methods of test — Part 12: Muscovite-type mica
60.60
Extenders for paints — Specifications and methods of test — Part 13: Natural quartz (ground)
95.99
Extenders — Specifications and methods of test — Part 13: Natural quartz (ground)
60.60
Extenders for paints — Specifications and methods of test — Part 14: Cristobalite
95.99
Extenders — Specifications and methods of test — Part 14: Cristobalite
60.60
Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica
95.99
Extenders — Specifications and methods of test — Part 15: Vitreous silica
60.60
Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides
95.99
Extenders — Specifications and methods of test — Part 16: Aluminium hydroxides
60.60
Extenders for paints — Specifications and methods of test — Part 17: Precipitated calcium silicate
95.99
Extenders — Specifications and methods of test — Part 17: Precipitated calcium silicate
60.60
Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate
95.99
Extenders — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate
60.60
Extenders for paints — Specifications and methods of test — Part 19: Precipitated silica
95.99
Extenders — Specifications and methods of test — Part 19: Precipitated silica
60.60
Extenders for paints — Specifications and methods of test — Part 20: Fumed silica
95.99
Extenders — Specifications and methods of test — Part 20: Fumed silica
60.60
Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz)
95.99
Extenders — Specifications and methods of test — Part 21: Silica sand (unground natural quartz)
60.60
Extenders for paints — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
95.99
Extenders — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
60.60
Extenders for paints
95.99
Zinc dust pigment for paints
95.99
Zinc dust pigments for paints — Specifications and test methods
95.99
Zinc dust pigments for paints — Specifications and test methods
60.60
Lead chrome green pigments for paints
95.99
Lead chrome green pigments — Specifications and methods of test
95.99
Lead chromate pigments and lead chromate-molybdate pigments for paints
95.99
Lead chromate pigments and lead chromate-molybdate pigments — Specifications and methods of test
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic absorption spectroscopic method and dithizone spectrometric method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame atomic absorption spectroscopic method and Rhodamine B spectrophotometric method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectroscopic method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectroscopic method and polarographic method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of the pigment and extender portion of the paint — Diphenylcarbazide spectrophotometric method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectroscopic method
95.99
Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
90.93
Paints and varnishes — Determination of "soluble" metal content — Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method
90.93
Cadmium pigments — Specifications and methods of test
90.93
Chrome oxide green pigments — Specifications and methods of test
90.93
Functional extenders for special application — Nanoscale diamonds for polymer composites
40.20
Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method
90.93
Paints and varnishes — Preparation of acid extracts from liquid paints
95.99
Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form
90.93
Zinc phosphate pigments for paints — Specifications and methods of test
90.93
Paints and varnishes — Determination of total mercury — Flameless atomic absorption spectrometric method
90.93
Dyestuffs — Determination of solubility in organic solvents — Gravimetric method
95.99
Dyestuffs — Determination of solubility in organic solvents — Gravimetric and photometric methods
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 1: Introduction
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 2: Dispersion using an oscillatory shaking machine
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 3: Dispersion using a high-speed impeller mill
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4: Dispersion using a bead mill
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5: Dispersion using an automatic muller
90.93
Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 6: Dispersion using a triple-roll mill
90.93
Pigments and extenders — Methods of assessment of dispersion characteristics — Part 1: Assessment from the change in tinting strength of coloured pigments
90.93
Pigments and extenders — Methods of assessment of dispersion characteristics — Part 2: Assessment from the change in fineness of grind
90.93
Pigments and extenders — Methods of assessment of dispersion characteristics — Part 3: Assessment from the change in gloss
90.93
Micaceous iron oxide pigments for paints — Specifications and test methods
95.99
Micaceous iron oxide pigments for paints — Specifications and test methods
90.93
Analytical colorimetry — Part 1: Practical colour measurement
90.93
Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
95.99
Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade and hiding power
60.60
Analytical colorimetry — Part 3: Special indices
95.99
Analytical colorimetry — Part 3: Special indices
60.60
Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
95.99
Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
60.60
Analytical colorimetry — Part 5: Procedure for colorimetric determination of colour differences of object colours according to equidistant colour spaces
60.60
Pigments, dyestuffs and extenders — Terminology — Part 1: General terms
95.99
Pigments, dyestuffs and extenders — Terminology — Part 1: General terms
90.92
Pigments, dyestuffs and extenders — Terminology — Part 1: General terms
20.00
Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects
95.99
Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects
90.92
Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects
20.00
Functional pigments and extenders for special applications — Part 1: Nanoscale calcium carbonate for sealant application
90.93
Functional pigments and extenders for special applications — Part 2: Nanoscale titanium dioxide for sunscreen application
90.93
Functional pigments and extenders for special application — Part 3: Fumed silica for silicone rubber application
90.93
Functional pigments and extenders for special applications — Part 4: Nanoscale titanium dioxide for photocatalytic application
60.60
Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
90.92
Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
30.99
Pigments and extenders — Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics
90.93
Determination of the silanol group content on the surface of fumed silica — Reaction gas chromatographic method
60.60
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 1: General introduction
90.93
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
90.93
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
90.93
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
90.93
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 5: Determination by filter pressure value test
90.93
Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 6: Determination by film test
90.93

No matching records found. Please try changing the filter settings.